Creality cr 10s promo

However there was a mess of filament and grease around the gears which promo makes me think that it was possibly skipping teeth.
Replacing Inductive Sensor with Limit creality Switch by, jGecik, is chaudiere it possible to replace mobil the inductive sensor on the Z axis with a regular limit switch?
The filament path looks OK otherwise (previously I promo had a jam due to the pneumatic coupler falling apart which was replaced, and that part creality still looks.Can anyone help me to solve the problem?So i cannot resume and nothing works.Wenn du auf unsere Website klickst oder hier navigierst, stimmst du der Erfassung von Informationen durch Cookies auf und außerhalb von Facebook.CR10S_PRO Heated_Bed, view Comment.Anyone know the name so I can buy more?Pause at Layer xy and changing the Filament works fine, while connected via USB (using the Resume Print Button creality in Simplify) but the same Gcode on the SD Card don't work. Got the 24V, but I am unsure what type code of connector I need to the board.
Has anyone else had this problem, and is it just due to filament dandruff clogging the teeth on the gears or creality something else I need to look at?
The temperature sensor is functioning, code and is reporting back 18-19 degrees which is ambient room temperature.

I can no france longer print successfully, so your help would be greatly appreciated.Creality CR-10S Pro 8 nos Nozzle 2*0.22*0.62*0.82*1.0MM (18.00 USD).The first time, I cleared it, reloaded and went on printing.Brand power voiture supply: Large power 500W, Brand wide france voltage power supply, 100V-240V can be used, no need to conforama adjust, convenient and fast, which can achieve long-term stable printing.Filament diameter.75mm, advantage: trix automatic location leveling: Dynamic leveling fill gaps, single-point fix gaps in time, only need to france level the voiture platform once with both automatic leveling and auxiliary creality leveling modes.The Printer pause promo the print correctly and move to the pause-position but there is no "Resume the Print" Button?!I have no other way of checking them other than visually.110, working mode, online or SD card offline, file format.The spring on the extruder creality has plenty of force without adding more, so the set screw just promo in far enough to make sure it does not pop out, but is not adding any extra compression on the spring. Input:100-240V.9A 50/60 Hz Output:DC 24V.